Walterscheid Stabiliser ADSST-S with mechanical strut and bolt (reinforced design)
Product advantages
Safe transport
Stability on the hillside
No handling in the danger area behind or under the tractor when the device is attached
Safe lane keeping even in difficult terrain
Convenient coupling through simple adjustment of the spread
Low susceptibility to dirt
Reduction of wear on the three-point linkage
The scope of delivery includes the ADSST-S stabiliser. All other attachments/accessories are not included in the scope of delivery and may have to be purchased separately.
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
The stabiliser is designed for mechanical lower links. The strut should always be arranged on both sides.
- B (mm)
- 51
- Manufacturer
- Walterscheid
- d (mm)
- 25,4
- L (mm)
- 330—344
- G (mm)
- M30
- Suspension travel (mm)
- 19
English
